
Advanced operations
Using alternative power sources
You can choose any of the following power sources for your camcorder: battery pack, house current, and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder.
Place | Power source | Accessory to be used |
Indoors | House current | Supplied AC power adaptor |
|
|
|
Outdoors | Battery pack | Battery pack |
|
|
|
In the car | 12 V or 24 V car battery | Sony DC adaptor/charger |
|
|
|
Note on power sources
Disconnecting the power source or removing the battery pack during recording or playback may damage the inserted tape. If this happens, restore the power supply again immediately.
Using the house current
To use the supplied AC power adaptor:
(1) Insert the connecting plate in the camcorder. Pull out the cover on the lid and pass the connecting cord through the lid.
(2) Connect the connecting cord to the DC OUT jack on the AC power adaptor.
(3) Connect the power cord to the AC power adaptor.
(4) Connect the power cord to a wall outlet.
1,2 | 3 | 4 |
To remove the connecting plate
The connecting plate is removed in the same way as the battery pack.
WARNING
The power cord must only be changed at a qualified service shop.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is connected to the power cord, even if the set itself has been turned off.
Using a car battery
Use a DC adaptor/charger such as Sony
This mark indicates that this product is a genuine accessory for Sony video product.
When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.
22