Searching for a photo – photo search/photo scan
You can search for the recorded still picture – Photo Search function. There are two modes in Photo Search:
•Using cassette memory, you can select the recorded date which is displayed on the LCD screen or in the viewfinder.
•Without using cassette memory.
You can also search for still pictures one after another and display each picture for five seconds automatically – Photo Scan function. Even if your tape has no cassette memory, you can use the Photo Scan function.
You can only operate with the Remote Commander.
Searching for a photo by using cassette memory – photo search
You can use this function only when playing back a tape with cassette memory (p. 64).
(1)Set the POWER switch to VTR.
(2)Press MENU to display the menu.
(3)Turn the control dial to select CM SEARCH, then press the control dial.
(4)Turn the control dial to select ON, then press the control dial.
(5)Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears.
(6)Press = or +to select the date for playback. The still picture of the selected date appears.
5 | 1 | POWER |
|
| VTR |
PHOTO SEARCH
OFF
1APR/ 1/98 8:52 AM
2JUL / 2/98 5:00 PM
3OCT/ 4/98 11:00 AM
CAMERA
6 | 2,3,4 | MENU |
PHOTO SEARCH
1APR/ 1/98 8:52 AM
2JUL / 2/98 5:00 PM
3OCT/ 4/98 11:00 AM
MENU
CM SEARCH ON
OFF
54