Superimposing a title
While you are playing back, pausing, or recording
After step 6, “SAVE” appears on the screen for 5 seconds and the title is set.
While in Standby mode
After step 6, the “TITLE” indicator appears. And when you press START/STOP to start recording, “SAVE” appears on the screen for 5 seconds and the title is set.
Titles placed from the top of the screen as follows:
HELLO ˜HAPPY BIRTHDAY ˜HAPPY HOLIDAYS ˜CONGRATULATIONS!
˜OUR SWEET BABY ˜WEDDING ˜VACATION ˜THE END˜CUSTOM TITLE.
When you have stored an original title
The title appears above “CUSTOM TITLE”.
Title colors (“COL”) changes as follows:
WHT (White) ˜YEL (Yellow) ˜CYAN (Cyan) ˜GRN (Green)˜VIO (Violet)˜ RED (Red)˜BLUE (Blue).
Title size (“SIZE”) changes as follows:
LG (Large)˜SM (Small).
If you select the title size “LG”, you can enter only 12 characters on the screen. To enter over 13 characters title, select “SM”.
Title position (“POS”) changes as follows:
If you select the title size “LG”, you can choose 8 positions. When you select the title size “SM”, you can choose 9 positions at all.
To display no title
Select OFF in the TITLE DSPL menu.
Notes on titles
•While the title is displayed, the picture does not fade in or out.
•You cannot superimpose a title to a blank portion of the tape.
•The titles you superimposed are displayed by only using the DV format video equipment with index titler function.
•When you are searching the tape using the other video equipment, the portion of the tape you superimpose the title may be detected as an index signal.
Notes on the cassettes
•If you use a cassette tape set to prevent accidental erasure, you cannot superimpose the title. Slide the protect tab so that the red portion is not visible.
•You can superimpose about 11 to 20 titles in one cassette, if one title consists of about 5 characters.
•If the tape has too many index signals and photo data, you may not be able to superimpose a title because the memory is full.
40