Trouble check

Others

Symptom

Cause and/or corrective actions

While editing using the DV connecting cable, recording picture cannot be monitored.

• Remove the DV connecting cable, and connect it again.

The camcorder becomes warm.

• If the power of the camcorder is on for a long time, it

 

becomes warm, which is not malfunction.

The supplied Remote Commander does not work.

•Something is blocking the infrared rays. mRemove the obstacle.

•The battery is not inserted with the correct polarity. mInsert the battery with the correct polarity. (p. 87)

•The batteries are dead. mInsert new ones. (p. 87)

No function works though the power is on.

•Disconnect the connection plate on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) (p. 82)

AC power adaptor

Symptom

Corrective actions

The VTR/CAMERA or CHARGE

• Disconnect the power cord. After about 1 minute, reconnect

lamp does not light.

the power cord. (p. 7)

The CHARGE lamp flashes.

• See the chart on the next page.

 

 

78