Operation by Remote Control

Using the supplied remote control RM-S7D, you can perform the same operations as with the release button and shift dial operations on the camera itself.

The remote control is convenient when you want to take pictures without holding the camera or for playing back pictures on a television.

Further, when operating from a position where the camera cannot receive the remote control signal, connect the camera and remote control with the remote control cable (supplied).

Send buttons

Send buttons perform the same function as the shift dial on the camera unit (but only plays back pictures one at a time in PLAY mode).

Release button (Effective in CAM mode)

Remote Control Terminal

Miscellaneous Operations Advanced

Note

The self-timer lamp on the front of the camera lights up briefly as signals from the remote control are received.

When you push the release button with the focus mode switch set to AF, the focus is automatically set before the picture is taken. There is a short time lag from the time you press the release button until the picture is taken.

If you want to take a picture without the time lag set the focus mode switch to MF. After manually adjusting the focus, press the release button to take the picture.

Inserting the Battery into the Remote Control

1 Slide the battery cover in the direction of the v mark while pushing the cover.

102 GB