4

4

Set the battery pack into its receptacle on the AC

 

 

adaptor/charger as shown, making sure that the v

5(a)

 

mark is adjacent to the notch on the lift (the L

 

series side).

5(b)

5

Pushing the battery pack down (a), slide it all the

 

 

way to the left (b).

When charging starts, the battery marks in the display window light in succession and the charge lamp lights. When the battery is charged, all of the battery marks light (practical use charge). Further, if you continue charging until the charge lamp goes out and the battery mark shows FULL, you can use the battery for a little longer than normal (full charge).

6 After charging has finished, slide the battery pack fully to the right and remove it from the AC adaptor/charger.

This camera operates only with the “InfoLITHIUM” battery (L series).

The “InfoLITHIUM” battery is a new type of lithium ion battery which can exchange data with compatible video equipment about its battery consumption. The digital still camera supports the “InfoLITHIUM” battery (L series). The “InfoLITHIUM” battery is recognized by the

mark.

“InfoLITHIUM” is a trademark of Sony Corporation.

Installation of the Battery Pack

After charging the battery, install it in the camera.

1

 

1

Make sure the camera power/mode dial is set to

 

 

the OFF position.

 

 

AE-LOCK

 

 

 

R-REVIEW

 

 

•PC

 

 

•PC

•OFF

DISPLCD

 

•PLAY

 

 

 

•CAM

 

 

•OFF

MENU

 

 

•CAM

EXCUTE

 

 

•PLAY

EXIT

 

 

Preparations

continued on next page 25 GB