10 | •OFF |
| •PC |
| •CAM |
| •PLAY |
| MENU |
| EXCUTE |
| EXIT |
10 Turning the power/mode dial to OFF turns the power off.
Note
If you do not operate the camera for about one minute when the camera is on in the CAM mode, the LCD monitor automatically shuts off (Standby Mode).
Also, if the camera is not touched for approximately four minutes after that, the camera automatically shuts completely off.
Taking
This camera employs an auto focus mechanism. When auto focus is turned on, the camera automatically focuses on the picture subject. Auto focus is turned on by setting the focus mode switch to AF. Centering the LCD monitor or the center of the finder on the subject and pressing the release button halfway focuses the picture frame.
When taking pictures with auto focus ON, check the AF focusing mark in the LCD monitor or viewfinder and listen for the beep. (This setting can be changed so that the beep does not sound.) If you press the release button halfway, the AF focusing mark changes as follows:
• On the LCD monitor
|
|
|
|
| When the picture is focused, the indicator lights a | ||||
When the release button is pressed halfway, | steady green. If the picture cannot be focused, the | ||||||||
the AF focusing mark flashes green. | indicator lights a steady red. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Picture a
When the release button is pressed halfway, the AF focusing mark flashes.
2000 5.6
When the picture is focused, the indicator lights steadily.
2000 5.6
When the picture cannot be focused, the indicator continues flashing.
2000 5.6
