7 Insert the DC power cable connector v mark side first into the battery case until it locks firmly into place.

7

8 Put the cable into the battery cover groove and close the battery cover.

Connecting to the PC

If the camera and the PC are connected using the PC interface cable (supplied), pictures stored on the PC card can be read by the PC and you can operate the camera from the PC.

Note

•Before connecting the camera to the PC, please install the following hardware and software:

–An IEEE1394 PCI board that conforms to OHCI standards (recommended: RATOC Systems, Inc. model type: RATOC-PCIFW1).

–TWAIN driver software for Windows98 (supplied)

Please refer to ReadMe on the driver setup CD-ROM for necessary system settings, installation procedures, and how to operate the TWAIN driver software.

•If the battery is disconnected during PC communication, images you have taken may be lost. When connecting to the PC, plug the AC adaptor/charger AC-VQ800 (supplied) into a wall socket.

•Place the card in the camera. Images are stored on the card even in PC mode.

•Please note that the camera may not work properly if it is connected through the standard 1394 (or 1394-compatible) interface that is provided with your computer.

Operations Advanced

 

REMOTE

PC

VIDEO

 

 

OUT

1

1 Connect the camera’s PC interface terminal and the PC’s IEEE1394 terminal using the PC interface cable (supplied).

Miscellaneous

A

EIZS

USER

 

F M

 

 

QUAL

AE

 

 

BW

continued on next page 105 GB