Printing from a PC (PC mode)
To print from a PC connected to the printer, you need to install the supplied software to your PC.
This section explains how to install the supplied software on your PC and how to use the supplied PictureGear Studio software to print an image.
Please also refer to the operating instructions of your PC.
On trademarks and copyrights of PictureGear Studio
•On copyrights of design materials The copyrights of the design materials contained in this software are owned by Sony Corporation or Sony Music Communications Corporation. Any commercial use is prohibited by the copyrights laws.
•Duplication of copyrighted materials, such as photographs, is prohibited except for private or domestic use.
•All other companies and product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, “™” and “®” are not mentioned in each case in this manual.
Installing the software
System requirements
To use the supplied printer driver and PictureGear Studio, your PC must meet the following system requirements:
OS: Microsoft Windows® XP Professional/Windows® XP Home Edition/Windows® 2000 Professional/Windows® Millennium Edition/Windows ® 98
Second Edition,
(Windows 95, Windows 98 Gold Edition, Windows NT, other versions (ex. Server, Personal) of Windows 2000 are not supported.)
CPU: Pentium III 500MHz or faster (Pentium III 800MHz or faster is recommended.)
RAM: 128 MB or more (256 MB or more is recommended.)
Hard disk space: 200 MB or more (Depending on the Windows version you use, more space will be required. To handle image data, you will need additional hard disk
space.)
Display:
Screen area: 800 x 600 pixels or more
Colors: High Color
mode) (PC PC a from Printing
Continued
15 GB