•When you check “View Readme File”, the Readme file is displayed. When you close the Readme file, the PictureGear Studio Setup dialog box is also closed.

•When you do not check “View Readme File”, the PictureGear Studio Setup dialog box is closed.

8 Remove the CD-ROM from your computer and keep it for future use.

Notes

•If the installation fails, do the installation procedures from step 2.

•The supplied CD-ROM will be required when you uninstall or re-install the PictureGear Studio. Keep it in good order for possible future use.

•The PictureGear Studio supplied with the DPP-FP30 has the following limitations:

–In PhotoCollection, you cannot select paper other than “Sony”.

–In PrintStudio, you cannot create or print “Label”.

–In PrintStudio, you cannot create or print a “Sticker, name card, or card”.

–In PrintStudio, you cannot print part of “Postcard” designs.

To delete the above limitations and upgrade the software to the version supplied with VAIO computer or CLIE handheld, execute the “Setup.exe” in the “pgs.add” folder.

Uninstalling the PictureGear

Studio

When the software becomes unnecessary, remove it from your PC hard disk as follows:

1 Remove the USB cable between the printer and the PC.

2 Insert the supplied CD-ROM into the CD-ROM drive of your computer.

The setup starts automatically and the installation window is displayed.

Note

In case the installation window is not automatically displayed, double-click the “Setup.exe” of the CD-ROM.

3 Click “Installing PictureGear Studio”.

The dialog box used for confirming deletion is displayed.

24 GB