Sony DPP-FP30 manual 36

Symptom	Check	Cause/Solutions
An image is printed	• Are you using an	c When using an application other than the
with borders even if	application software	PictureGear Studio, an image might be printed
I select borderless	other than	with borders even if you select borderless
print option.	PictureGear Studio?	print. If this occurs, do either of the following
		to print an image without borders:
		– When you can set print range with an
		application, set an image to be printed fully
		in the print range even if it is printed over
		the range.
		– Set a larger value in the “Enlarge/Reduce”
		text box in the “Paper/Output” tab of the
		“Sony DPP-FP30 Properties” dialog box.
		(.page 28)
		– If borders remain on the right and bottom
		sides of a printed image even after you set a
		larger value, check “Upper left reference”.
An image is not	• Is “Exif Print” checked	c The Exif Print setting in the “Color
	in the “Graphics” tab	reproduction/Picture quality” section
printed in correct
	of the “Sony DPP-	supports the PictureGear Studio only. To
colors.
	FP30 Properties”	print from other application, uncheck “Exif
	dialog box?	Print”.
	• Is “ICM” selected in	cThe ICM setting may be valid only when
	the “Graphics” tab of	you are using an ICM-compliant
	the “Sony DPP-FP30	application. Check to see if the application
	Properties” dialog box?	software you are using supports ICM.
Preview image does		cThe print settings adjusts the printer itself
not reflect the print		and cannot influence the preview image.
settings in the
“Graphics” tab of
the “Sony DPP-
FP30 Properties”
dialog box.
Print quantity	• Are you using	cSet the print quantity in the “Print” dialog
specified in the	PictureGear Studio?	box of the PictureGear Studio. The print
“Paper/Output”		quantity setting in the “Paper/Output” tab
tab of the “Sony		of the printer driver does not take effect.
DPP-FP30		cDepending on the application software you
Properties” dialog		use, the print quantity setting of the
box does not take		application software may have priority over
effect.		the setting specified in the printer driver
		dialog box.

36 GB