11Connect the USB connectors of the printer and your computer.

Use a commercially available USB connecting cable.

To USB connector (B-TYPE)

To USB

Windows PC

connector

 

Notes

•You cannot connect a PictBridge- compliant digital camera and a PC simultaneously to the printer. When printing from a PC, remove the digital camera from the printer.

•Use a commercially available A-B TYPE USB-compatible connecting cable shorter than 3m in length. The type of USB cable you should use may differ depending on the computer. For details, see the instructions manual of your computer.

When you connect a PC

The printer automatically enters the PC mode and the printer setup will start automatically.

When the printer setup is complete, the “Setup Complete” dialog box is displayed.

12Click “Finish”.

The installation of the printer driver is complete. When you are prompted to restart your computer, restart the computer.

13• To finish installation, click

“Complete” and remove the

Printing

CD-ROM from your

 

computer and keep it for

 

future use.

from

• To continue to install the

a

PictureGear Studio software,

PC

click “Installing the

(PC

PictureGear Studio” and

mode)

pages 22.

follow the procedures on

 

Continued

19 GB