Basic Operations
U | Level indicators | Display | Rotary encoder |
|
|
|
|
|
|
|
|
INPUT LEVEL (1~4)
Choosing a Program
The processor comes with 200 different preset programs (numbers 001~200) as well as room for 200 user programs for storing the programs you create (numbers 201~400). Use the following procedure to choose the program you desire.
1 Press U to turn on the power.
After a few seconds, the play mode screen appears.
0 0 1 S u p e r | R e v e r b |
F x A : 1 1 / | F x B : 1 2 |
|
|
2 Turn INPUT LEVEL (1~4) to adjust the input levels.
If an input level indicator lights red (clip), the input level for that channel is set too high. Be sure to set the input level correctly since it has a direct relationship to the quality of the effects (see page 6 for details).
1 | 2 | INPUT LEVEL 3 | 4 |
3 Turn the rotary encoder to select a program (001~400).
The program numbers (and corresponding names) appear in the display as you turn the jog dial.
Before you turn on the connected components
Be sure to turn the volume level down to avoid an unexpected output of massive volume.
You can also search programs by effect type
See page 12 for details.
10GB
