Reading the Display
During play mode the display provides various information about the selected program
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0 0 1 S u p e r R e v e r b |
| ||||||||||||
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| F x A : 1 1 | / |
| F x B : 1 2 |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 2 | 3 | 4 5 | 6 |
| ||||||||||||
1Program number and name:
The number (001~400) and name of the current program .
2FxA On/Off symbol:
“•” : FxA is on (in the illustration, FxA is on).
(Blank) : FxA is off
3FxA effect number:
The number (01~45) of the effect assigned to the current program’s FxA block.
The effect numbers correspond to those printed on the front panel to the left of the display. When a 4ch effect is assigned to the FxA block, the FxB effect number and the structure symbol do not appear in the display.
4Structure symbol:
“/” (Parallel) : To use FxA and FxB separately (the illustration shows a parallel structure).
“m” (Serial) : To feed the output of FxA into FxB for additional processing.
The structure symbols correspond to those printed on the front panel below the display. (See page 8 for details.)
5FxB On/Off symbol:
“•” : FxB is on
(Blank) : FxB is off (in the illustration, FxB is off).
6FxB effect number:
The number (10~45) of the effect assigned to the current program’s FxB block.
The effect numbers correspond to those printed on the front panel to the left of the display.
Outputting Without Effects (BYPASS)
The bypass function allows you to output the original signal without adding any effects. This function can also be set to completely cut (mute) the sound output from the processor (see page 18 if you want to switch to muting).
Press BYPASS to activate the bypass (mute) function.
“BYPASS” (or “MUTING”) appears in the display.
< < B Y P A S S > >
Press again to cancel and output with effects.
11GB
