System Operations
Setting the MIDI Program Table
1Use the rotary encoder to specify the MIDI program change number.
S y s t e m : M I D I T a b l
M I D I # 0 0 1nP r g # 0 0 1
2Press EDIT PARAMETER /.
3Use the rotary encoder to specify the program to be switched to.
S y s t e m : M I D I T a b l
M I D I # 0 0 6nP r g # 0 0 6
4Press EXIT to return to the play mode or press EDIT PARAMETER ?or /to switch to another parameter.
Setting the MIDI Bulk Transfer Options
1Make sure the “MIDI Thru/Out” setting is set to “Out”.
2Use the rotary encoder to select “Sys” or the first program number to be transferred.
You can transfer either system settings or program data.
(Sys) : Transfers data for the settings made in the system mode.
(#201~#400): Transfers the program data for the specified range of program numbers.
S y s t e m : M I D I B u l k
T r a n s # 2 0 1n# 4 0 0
3Press EDIT PARAMETER /.
4Use the rotary encoder to select the last program number to be transferred.
S y s t e m : M I D I B u l k
T r a n s | S y sn# 4 0 0 |
5Press ENTER (TAP) to output the data. “Transferring..” appears during the transfer.
When finished, the “MIDI Bulk” parameter reappears.
6Press EXIT to return to the play mode or press EDIT PARAMETER ?or /to switch to another parameter.
Other Settings
The system set up parameters let you to select how the BYPASS button and TAP function parameters will operate. For example, you can set BYPASS mute the output of the processor instead of passing the input signal.
1 Press SYSTEM twice.
The first set up parameter (“Bypass”) appears automatically.
S y s t e m : S e t U p
B Y P M o d e B y p a s s
2 Use the rotary encoder to select “Bypass” or “Muting”.
Select | When |
|
|
Bypass | you want to output the original signal |
| without adding any effects. Only the original |
| signal is output (see “Bypass” on page 11). |
|
|
Muting | you want to completely cut the sound output |
| from the processor (including the input |
| signal). We especially recommend using |
| mute when connecting the processor in a |
| |
| page 9). |
|
|
3 Press EDIT PARAMETER /to switch to “Tap”.
S y s t e m : S e t U p |
|
T a p M o d e | x 1 |
4 Use the rotary encoder to select “x1/4”, “x1/3”, “x1/2”, “x1”, “x2”, or “x3”.
These represent different ratios for calculating the values input via the TAP function.
Example: When the tap is set to “x1/4”, tapping at a rate that would normally create a 1 second delay creates a 0.25 second delay.
5 Press EXIT to return to the play mode.
18GB
