Others

Symptom

Cause

Solution

Your camera does not

• You are not using an “InfoLITHIUM” battery

p Use an “InfoLITHIUM” battery pack (page 11).

work.

pack.

 

 

• The battery level is low. (The E indicator

p Charge the battery pack (page 11).

 

appears.)

 

 

• The AC power adaptor is not connected

p Connect it securely to the DC IN jack of your camera and to a

 

securely.

wall outlet (wall socket) (page 14).

 

• The built-in microcomputer is not working

p Turn the power off and then on after one minute, and check that

 

properly.

the camera works properly.

 

 

 

The power is on, but the

• The built-in microcomputer is not working

p Remove the battery pack, then install it again after about one

camera does not work.

properly.

minute and turn on the camera. If the functions still do not work,

 

 

press the RESET button located inside the battery/“Memory

 

 

Stick” cover with a fine-tipped object, then turn the power on

 

 

again. (When you press the RESET button, all settings including

 

 

the date and time are cleared.)

 

 

 

You cannot identify an

—

p Check the indicator (page 118).

indicator on the screen.

 

 

 

 

 

The lens gets fogged.

• Moisture condensation has occurred.

p Turn off the camera and leave for about an hour at room

 

 

temperature for the moisture to evaporate before use (page 113).

 

 

 

The played back image is

• You are playing back a file with an image size

—

small.

larger than 2560×1920 that was recorded using

 

 

another camera.

 

 

 

 

The camera becomes

—

p This is not a malfunction.

warm when you use it for

 

 

the long time.

 

 

 

 

 

100