Turning on/off your camera

How to use the control button

POWER lamp

POWER switch

,Slide the POWER switch in the direction of the arrow.

The POWER lamp (green) lights up and the power is on. When you turn on your camera for the first time, the CLOCK SET screen appears (page 16).

Turning off the power

Slide the POWER switch in the direction of the arrow again. The POWER lamp goes out, and the camera turns off.

Auto power-off function

If you do not operate the camera for about three minutes during shooting or viewing or when performing SET UP, the camera turns off automatically to prevent wearing down the battery. The auto power-off function only operates when the camera is operating using a battery pack. The auto power-off function also will not operate in the following circumstances.

When viewing movies

When playing back a slide show

When a connector is plugged into the (USB) jack or the A/V OUT (MONO)

jack.

800

400

200

100

AUTO

MODE

TIFF

VOICE

E-MAIL

EXP BRKTG

BURST 3

NORMAL

 

MODE

 

ISO

 

To change the current settings of the camera, bring up the menu or the SET UP screen (page 42), and use the control button to make the changes.

For each item, press v/V/b/B to select the desired value, then press the center z or b/B to make the setting.

started Getting

15