When you use digital zoom or the hologram AF, AF operates with priority on subjects in or near the center of the frame. In this case, the AF range finder frame is not displayed.

When you select Multipoint AF in step 3, the automatically adjusted AF range finder frame appears in green when focus is achieved.

60min

640

101

4

60min

640

101

4

Shooting with AF lock

When it is difficult to focus because the subject is not in the center of the frame, you can focus using the Focus range select function. For example, when shooting two human subjects with a gap between them, the camera may focus on the background visible through the gap. In these cases, use AF lock to ensure the subjects are in correct focus.

AF lock lets you capture an image with the correct focus even if the subject is at the edge of the frame.

aSet the mode dial to , S, A,M, SCN or (Clip Motion/ Multi Burst).

bSet FOCUS switch to AUTO/ ZOOM.

cCompose the shot so that the subject is centered in the AF range finder frame, then press and hold the shutter button halfway down.

The camera focuses on the subject. When the AE/AF lock indicator changes from flashing to lighted up and there is a beeping sound, the focus adjustment is completed.

60min

640

101

4

0EV

F5.6

50

AF range finder

AE/AF lock indicator

shooting image still Advanced

47