Settings | For details on the operation 1 page 54 |
Main – Preferences
The default settings are marked with .
InitializeInitializes all settings.
1Select [Initialize] with the control button, then press z. The message “Initialize all settings” appears.
2Select [OK], then press z. Initializes is complete.
To cancel the initializingSelect [Cancel] in step 2, then press z.
• Be careful not to get the camera be turned off.
USB ConnectSelects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable.
| PictBridge | Connects the camera to a PictBridge compliant printer |
|
| |
|
|
|
| Mass Storage | Establishes a Mass Storage connection between the camera |
|
| and a computer or other USB device (page 86). |
|
|
|
| Auto | The camera recognizes automatically and sets up |
|
| communication with a computer or PictBridge compliant |
|
| |
|
| • If the camera and a PictBridge compliant printer cannot be |
|
| connected when set to [Auto], change the setting to |
|
| [PictBridge]. |
|
| • If the camera and a computer or other USB device cannot be |
|
| connected when set to [Auto], change the setting to [Mass |
|
| Storage]. |
|
|
|
settings the Changing
63