Viewing images via a Wireless LAN

With a DLNA-enabled TV set, you can view the images stored in this camera via an access point without connecting the devices via an A/V cable.

•If the access point has already been configured, you can skip steps 2 through 5.

Control button

MENU button

HOME button

1Turn on the camera and the TV.2Select [ ] (Settings) t [ Network] t [Access Point] withthe control button, then press z.3Select [Auto Scan] with the control button, then press z.

The search result is displayed.

•If the access point cannot be detected, perform [Manual Settings] (page 70).

4Select the desired access point with the control button, then press z.5When a password is required, enter the password, select [Exit]
with the control button, then press z.

Select [Password], then press z. The character input tool appears. Enter the password. Select [OK], then press z.

6Select [ ] (Toolbox) t[ Share Images] with the control button, then press z.7Select [OK] with the control button, then press z.

The image selection screen appears.

•It may take several seconds to a few minutes to establish a connection.

network a Using

95