PictBridge compliant printer

Symptom

Cause

Solution

The connection cannot be

• The printer is not compliant with the PictBridge.

p Consult with the printer manufacturer.

established.

• The printer is not set for the connection with the

p Check that the printer is turned on and can connect with the

 

camera.

camera.

 

• [USB Connect] is not set to [PictBridge] in the

p Set it to [PictBridge] (page 115).

 

SET UP settings.

 

 

• Depending on the circumstances, the connection

p Disconnect and connect the USB cable again. If an error

 

may not be established.

message is indicated on the printer, refer to the operating

 

 

instructions supplied with the printer.

 

 

 

You cannot print images.

• The camera is not connected to the printer.

p Check that the camera and the printer are properly connected

 

 

using the USB cable.

 

• The printer is not turned on.

p Turn on the printer. For further information, refer to the

 

 

operating instructions supplied with it.

 

• If you select [Exit] during printing, you may not

p Disconnect and connect the USB cable again. If you cannot

 

print again depending on your printer.

print still, disconnect the USB cable, turn off and on the printer,

 

 

then connect the USB cable again.

 

• Movies cannot be printed.

—

 

• Images modified with a computer or images shot

—

 

using other than this camera may not be able to

 

 

be printed.

 

 

 

 

Printing is canceled.

• You disconnected the USB cable before the

—

 

(Not disconnect USB cable) mark

 

 

disappears.

 

 

 

 

You cannot insert the date

• The printer does not provide these functions.

p Consult with the printer manufacturer whether the printer

or print images in the

 

provides these functions or not.

index mode.

• The date may not be inserted in the index mode

p Consult with the printer manufacturer.

 

depending on the printer.

 

 

 

 

“---- -- --” is printed on the

• The recording date data is not recorded on the

p The images that do not have the recording date data cannot be

date-inserted part.

image.

printed with the date inserted. Set [Date] to [Off] and print it.

 

 

 

104