Shooting still images

Inserting and removing a “Memory Stick”

1

,Open the jack/“Memory Stick” cover.

For details on “Memory Stick,” see page 117.

Terminal side

2

Label side

 

,Insert the “Memory Stick.”

Insert a “Memory Stick” all the way in until it clicks as illustrated.

Push the “Memory Stick” all of the way in so that it is securely seated in the connector. If the “Memory Stick” is not inserted correctly, you may not be able to record or display images with the “Memory Stick.”

3

Access lamp

 

,Close the jack/“Memory Stick” cover until it clicks.To remove a “Memory Stick”

Open the jack/“Memory Stick” cover, then push the “Memory Stick” to pop it out.

Whenever the access lamp is lit, the camera is recording or reading an image. Never remove the “Memory Stick” or turn off the power at this time. The data may be corrupted.

20