Others

Symptom

Cause

Solution

Your camera does not

• The battery level is low. (The E indicator

p Charge the batteries (page 11).

work.

appears.)

 

 

• The AC Adaptor (not supplied) is not connected

p Connect it securely to the DC IN jack of your camera and to a

 

securely.

wall outlet (wall socket) (page 16).

 

 

 

The power is on, but the

• The built-in microcomputer is not working

p Remove the batteries, then after one minute reinsert the batteries

camera does not work.

properly.

and turn on the camera. If this does not work, press the RESET

 

 

button located on the bottom of the camera with a pointed

 

 

object, then turn the power on again. (This will clear the date

 

 

and time settings, etc.)

 

 

 

You cannot identify an

—

p Check the indicator (pages 122 to 125).

indicator on the screen.

 

 

 

 

 

The lens gets fogged.

• Moisture condensation has occurred.

p Turn off the camera and leave for about an hour at room

 

 

temperature for the moisture to evaporate before use (page 116).

 

 

 

The camera becomes

—

p This is not a malfunction.

warm when you use it for

 

 

the long time.

 

 

 

 

 

The lens does not move

• The batteries are discharged.

p Replace them with charged batteries (pages 11 and 13) or use

when you turn off the

 

the AC Adaptor (not supplied) (page 16).

camera.

 

 

 

 

 

Troubleshooting

105