Troubleshooting

“---- -- --” is printed on the date-inserted part of the image.

Images that do not have the recording data cannot be printed with the date inserted. Set [Date] to [Off] and print the image again (page 94).

Cannot select the print size.

Consult the printer manufacturer as to whether the printer can provide the desired size.

Cannot print the image at the size selected.

Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper size after the printer has been connected to the camera.

The print setting of the camera differs from that of the printer. Change the setting of either the camera (page 94) or the printer.

Cannot operate the camera after canceling printing.

Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer.

OthersThe camera does not function with the lens portion extended.

Do not attempt to force the lens that has stopped moving.

Insert a charged battery, then turn on the camera again.

The lens gets fogged.

Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it.

The lens does not move when you turn off the camera.

The battery pack is discharged. Replace it with a charged battery pack.

The camera becomes warm when you use it for a long time.

This is not a malfunction.

The Clock Set screen appears when you turn on the camera.

Set the date and time again (page 68).

You want to change the date or time.

Set the date and time again (page 68).

108