Copying images to your computerStage 2: Connecting the camera and your computer

2 To the multi

connector

1 To a USB jack

Cable for multiuse terminal

With Windows XP, the AutoPlay wizard appears on the desktop.

“Connecting to Mass Storage...” appears on the screen of the camera.

Access indicators*

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

* is displayed on the screen during the communication session.

Do not operate the computer while the indicator is displayed. When the indicator changes to

, you can start using the computer again.

If “Connecting to Mass Storage...” does not appear, set [USB Connect] to [Mass Storage] (page 63).

When the software (supplied) has been installed, the [Import Images] screen (page 84) may be displayed. In this case, you can import images directly using “Picture Motion Browser”.

Stage 3-A: Copying images to a computer

For Windows 2000, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 78.

For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 78.

This section describes an example of copying images to a “My Documents” folder.

1 After making a USB connection in Stage 2, click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] t [OK] as the wizard screen appears automatically on the desktop.

1

2

The “Scanner and Camera Wizard” screen appears.

2 Click [Next].

The images saved on the “Memory Stick Duo” of the camera appear.

computer your Using

77