For details on the operation 1 page 80
•When cleaning the CCD, do not put the tip of a blower brush into the cavity beyond the lens mount. You do not need to put the blower brush close to the CCD.
6Attach the lens and set the POWER switch to OFF.
•The camera starts beeping if the battery pack becomes low during cleaning. Stop the cleaning immediately and set the POWER switch to OFF.
zTo keep dust from entering the camera
While it is impossible to completely shut out dust, the following reminders should help lower the possibility.
•Choose a location with little dust to change the lens, and complete the operation quickly.
•Do not leave the camera without a lens or the body cap.
•When attaching the body cap, remove all the dust from the cap before placing it on the camera.
Reset default
You can reset the main functions of the camera.
1Select [Enter] in [Reset default].
The message “Reset default?” appears.
2Select [Yes] with b on the controller, then press the center of the controller. The main functions are reset.
• For details on the items to be reset, see “Reset default” (page 151).
104