| Shooting with shutter speed priority |
| P | A | S | M |
|
|
|
|
|
|
| mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You can adjust the shutter speed manually. If you shoot a moving subject at a higher shutter speed, it appears as if frozen on the image. At a lower shutter speed, the subject appears as if it flowing.
Aperture value is automatically adjusted to attain correct exposure according to the brightness of the subject.
High shutter speed | Slow shutter speed |
Mode dial
Control dial
1Set the mode dial to S.
2Select a shutter speed using the control dial.
•You can adjust the shutter speed between 30 and 1/4000 second. You can adjust it between 30 and 1/ 125 second (with the Super SteadyShot function activated) or 30 and 1/160 second (with the Super SteadyShot function deactivated) when using the flash.
•The shutter speed is adjusted in 1/3 Ev increments.
•If the proper exposure is not obtained after making the settings, the aperture value on the LCD monitor and in the viewfinder flashes when the shutter button is pressed halfway down. You can shoot at this point, but adjusting again is recommended.
•When the flash is pulled up, the flash fires regardless of the amount of ambient light (page 54).
•When using the flash, if you close the aperture (a larger
•When the shutter speed is one second or more, the noise reduction will be done after shooting (page 85).
•The
36