Setup menu 1
For details on the operation 1 page 80
The default settings are marked with 
.
LCDbrightness
You can adjust the brightness of the LCD monitor.
1Select [Enter] in [LCDbrightness].
2Adjust the brightness with b/B on the controller or with the control dial, then press the center of the controller.
Transfer mode
Selects the USB mode to be used when connecting the camera to a computer, etc., using a USB cable.
| Mass Storage | Used for copying images to the computer. The camera is |
|
| recognized as a USB mass storage device. |
|
|
|
| PTP | Prints the images with a PictBridge compliant printer or |
|
| copies images to PTP (Picture Transfer Protocol) compliant |
|
| devices. |
|
| • For details on printing with a PictBridge compliant printer, see |
|
| |
|
|
|
Video output
Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to view images on a TV screen, check page 79 for the TV color system of the country or region where the camera is used.
NTSC | Sets the video output signal to NTSC mode (e.g., for the USA, |
| Japan). |
|
|
PAL | Sets the video output signal to PAL mode (e.g., for Europe). |
|
|
98