For details on the operation 1 page 80
| Autoflash | When the mode dial is set to AUTO, P, or Scene Selection, |
|
| and the flash is pulled up, the flash fires automatically only |
|
| when the flash is necessary. |
|
|
|
| When the mode dial is set to AUTO, P, or Scene Selection, | |
|
| and the flash is pulled up, the flash fires every time. |
|
|
|
Bracket order
The order in bracket shooting (page 62) can be selected. The order is common to both ambient light bracket and flash light bracket.
• This does not apply to white balance bracket.
| 0 t – t + | Use 0Ev in shooting the first picture which presents the best |
|
| shooting opportunity. |
|
| Example: 0Ev t |
|
|
|
| – t 0 t + | Ordered from low to high exposure. |
|
| Example: |
|
|
|
Reset
You can reset the main functions of the recording mode.
1Select [Enter] in [ Reset].
The message “Reset recording mode?” appears on the LCD monitor.
2Select [Yes] with b on the controller, then press the center of the controller. The main functions of the recording mode are reset.
• For details on the items to be reset, see “Reset default” (page 151).
menu Recording
87