Using your Macintosh computer
You can copy images to your computer or edit a RAW data file using “Image Data Converter SR Ver.1.1”.
•“Picture Motion Browser” is not compatible with Macintosh computers.
•Check that [Transfer mode] in the 
Setup menu is set to [Mass Storage]. If it is set to [PTP], the camera is not recognized.
•When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.
Recommended computer environment
The following environment is recommended for a computer connected to the camera.
Recommended environment for copying images
OS
later)
USB jack: Provided as standard
Recommended environment for using “Image Data Converter SR Ver.1.1”
OS
CPU: iMac, eMac, iBook, PowerBook, Power Mac G4/G5 series, Mac mini
Memory: 256 MB or more (512 MB or more is recommended.)
Display: 1024 × 768 dots or more, 32,000 colors or more
Notes on connecting your camera to a computer
•Operations are not guaranteed for all the recommended computer environments mentioned above.
•If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate depending on the types of USB devices you are using.
•Operations are not guaranteed when using a USB hub.
•Connecting your camera using a USB interface that is compatible with
1Prepare the camera and a Macintosh computer.
Perform the same procedure as that described in “Stage 1: Preparing the camera and the computer” on page 107.
2Connect the USB cable.
Perform the same procedure as that described in “Stage 2: Connecting the camera and your computer” on page
3Copy image files to the Macintosh computer.
2Drag and drop the image files to the hard disk icon.
The image files are copied to the hard disk.
•For details on the storage location of the images and file names, see page 112.
120