(Continuous AF)

In this AF mode, the camera continues to focus while the

 

shutter button is pressed and held halfway down. This mode

 

is used when the subject is in motion.

•If the wide AF area is selected, the focus frame switches to match the position of the subject. The frame in focus turns red and starts flashing.

•The buzzer will not sound when the subject is in focus.

To make a fine adjustment in (Direct Manual Focus)

1Select (Direct Manual Focus) in AF mode.

2Press the shutter button halfway down to lock the focus.

3Turn the focusing ring to fine-tune the focus while pressing the shutter button halfway down.

Shutter button

Focusing ring

4Press the shutter button fully down.

•Once you release your finger from the shutter button, the focus lock operation starts again from the beginning when you press the shutter button halfway down.

 

Flash

 

 

 

ISO

WB

D-R

DEC

Sets up the flash mode and the flash compensation.

Flash mode

If the built-in flash is pulled up, the flash automatically fires when the surroundings are dark (the default setting). You can intentionally change the flash mode.

1Display the flash mode screen with the function dial and the Fn button (page 43).

2Display the Flash mode screen with v on the controller.

3Select the desired mode with b/B on the controller, then press the center of the controller.

54