Assigning functions to ASSIGN switches
You can assign the desired function to any of the ASSIGN switches.
1 Display the FUNCTION 1 page on the OPERATION menu.
For details on menu operations, see “Basic menu operations” on page 94.
You can assign functions to each ASSIGN switch as follows.
Item | Description |
ASSIGN SW <1> | Assigns the function to ASSIGN 1 |
| switch. |
|
|
ASSIGN SW <2> | Assigns the function to ASSIGN 2 |
| switch. |
|
|
ASSIGN SW <3> | Assigns the function to ASSIGN 3 |
| switch. |
|
|
ASSIGN SW <4> | Assigns the function to ASSIGN 4 |
| switch. |
|
|
2 Press the MENU knob. Then turn the MENU knob to move b to the item corresponding to the switch to which you want to assign the function, and press the MENU knob again.
The corresponding ASSIGN SW (1 to 4) SEL window appears. You can assign the following functions to the ASSIGN switch.
Item | Description |
OFF | Assigns no function. |
|
|
MARKER | Assigns the ON/OFF function to |
| display all markers.* |
|
|
ATW | Assigns the ON/OFF switch |
| function of ATW. |
|
|
LENS RET | Assigns the function of recording |
| review. |
|
|
REC SWITCH | Assigns the VTR start/stop |
| function. |
|
|
TURBO SWITCH | Assigns the turbo gain value set in |
| TURBO GAIN (page 104). |
|
|
*Even when the MARKER item is set to OFF on the MARKER 1 page of the OPERATION menu, the ASSIGN switches allow you to display or not to display all markers.
3 Turn the MENU knob to move b to the desired function, and press the MENU knob.
The function is assigned, and the FUNCTION 1 page appears again.
To return to the previous page
Move b to ESC at the right top of the window and press the MENU knob.
The FUNCTION 1 page is displayed again.
Selecting the lens file
You can change the lens file according to the lens in use.
1 Display the LENS FILE menu of the OPERATION menu.
For details on menu operations, see “Basic menu operations” on page 94.
The LENS FILE page shows the name and the iris setting value of the lens currently selected.
? 17 | LENS | FILE | TOP |
|
| |
|
|
|
|
|
| Lens file number |
LENS | FILE | SELECT: |
| 2 | ||
|
| |||||
F.ID :J22ex7.6B 
Lens name and iris setting value
2 Set LENS FILE SELECT to the lens file number corresponding to the lens in use.
If you do not want to use a lens file
Set LENS FILE SELECT to the lens file number 1 (F.ID: No offset).
Selecting the aspect ratio (DSR-450WS/450WSP only)
You can select the aspect ratio of the video output signal.
1 Display the FORMAT menu of the OPERATION menu.
For details on menu operations, see “Basic menu operations” on page 94.
? 18 | FORMAT |
|
|
16:9/4:3 SELECT | : | 16:9 | |
WIDE | ID | : | ON |
SCAN | MODE | : | I |
2 Set 16:9/4:3 SELECT to the desired aspect ratio.
Settings Detailed and Displays Menu 5 Chapter
Adjustments and Settings from Menus | 107 |
|
|