For details on using the wireless microphone system, see the operating instructions for the microphone and tuner.

To attach a WRR-855

1 Open the cover of the WRR connector.

WRR connector

2 Turn on a WRR-855, and set the MUTING to ON or OFF.

The power of a WRR-855 can be synchronized with the POWER switch of the camcorder.

3 Insert the WRR-855 into the CA-WR855.

Fasten the screws (supplied with the WRR-855).

4 Fit the attachment plate on the rear side of the CA- WR855 to the V-groove on the battery attachment interface, and then slide the CA-WR855 down until it connects to the WRR connector.

CA-WR855

5 Set one of the AUDIO IN (CH-1/CH-2) switches to WRR (wireless).

To attach a WRR-861/862 (When using a BP-GL65/GL95/L60S Battery Pack)

1 Attach a WRR tuner fitting (not supplied, service part number A-8278-057-A) to the back of the camcorder.

1Use a Phillips type screwdriver to tighten the four screws placed in the tuner fitting as illustrated below.

Note

Make sure that the four screws are fully tightened.

2 Loosen the adjustment screws of the tuner fitting.

2Chapter

 

3 Adjust the tuner fitting position for a BP-GL65/

Preparation

GL95/L60S Battery Pack to be attached, and

 

tighten the adjustment screws to fix its position.

 

4 Attach the mount plate supplied with the WRR-

 

861/862.

 

BP-GL65/GL95/L60S

Adjustment

Mount plate (supplied

screws

with WRR-861/862)

Back of the

 

camcorder

Phillips type screwdriver

 

2 Attach the battery pack.

For details about attaching the battery pack, see “Using a battery pack” on page 30.

3 Mount the tuner on the WRR tuner fitting.

WRR-861/862

For details about the WRR tuner fitting (service part number A-8278-057-A), contact your Sony service representatives.

Preparing Audio Input System

37