3To carry out the storing, turn the MENU knob to move b to YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

You can select the contents of the user file to be displayed on each page of SCENE STORE and

SCENE RECALL.

For details, see “To select the display contents” on page 112.

White balance setting data saved in the scene file

The white balance setting data saved in the scene file refers to the value of white balance during saving, that is, when the WHITE BAL switch is set to A, the adjusted values in memory A are saved in the scene file, and when the WHITE BAL switch is set to PRST, the preset value is saved.

White balance setting data when loading the scene file

The method for loading the white balance setting data when loading the scene file differs depending on the setting of the SCENE WHITE DATA item on the REFERENCE page.

F05REFERENCE

REFERENCE STORE : EXEC

REFERENCE CLEAR : EXEC

REFERENCE LOAD : EXEC

REFERENCE SAVE : EXEC

F.ID: sssssssssssssssss

SCENE WHITE DATA: OFF

When SCENE WHITE DATA is set to ON

The white balance setting data saved in the scene file is loaded. (However it is not loaded when the WHITE BAL switch on the camcorder is set to PRST.)

When SCENE WHITE DATA is set to OFF

The white balance setting data is not loaded.

To save scene files from the camcorder memory to the “Memory Stick”

You can save five scene files from the camcorder to the “Memory Stick” in a single operation.

1 Display the SCENE FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 94.

2 Press the MENU knob. Then turn the MENU knob to move b to SCENE STORE, then press the MENU knob again.

3 Turn the MENU knob until the desired SCENE STORE page appears, then press the MENU knob.

P01 SCENE STORE

ESC

DISPLAY MODE

:

ALL

001.SCENE1

FEB/05/02

002.SCENE2

FEB/06/02

003.NO FILE

 

 

004.SCENE4

FEB/08/02

005.SCENE5

FEB/08/02

***.5FILE SAVE MEM1-5

4 Turn the MENU knob to move b to 5FILE SAVE b MEM1-5, and press the MENU knob.

The message “STORE OK? YES b NO” appears.

P01 SCENE STORE

ESC

STORE

OK?

YES

NO

DISPLAY

MODE

:

ALL

001.SCENE1

002.SCENE2 003.NO FILE 004.SCENE4 005.SCENE5

***.5FILE SAVE MEM1-5

5 To carry out the save, turn the MENU knob to move b to YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

When the save is completed, the message “COMPLETE” appears.

Note

If files have been saved in the page selected in step 3, those files are replaced with files loaded from the camcorder memory. For example, files from 001 to 005 are replaced on the above procedure.

To set the file ID

Before the data is saved as a scene file, it is useful to set a file ID to identify it. The set file ID is saved together with the data.

1 Display the SCENE FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 94.

2 Press the MENU knob. Then turn the MENU knob to move b to F. ID, and press the MENU knob again.

A character table appears.

F04SCENE FILE TOP

!#$%&'()*+,-./012345678 9:;<=>?@ABCDEFGHIJKLMNOP QRSTUVWXYZ[]abcdefghijk

lmnopqrstuvwxyz~

 

 

INS DEL RET

ESC

END

sSTANDARD

 

 

SCENE

 

RECALL

:

EXEC

SCENE

 

STORE

:

EXEC

F.ID

:

S

TANDARD

 

 

Data Setting User the Loading and Saving 6 Chapter

Saving and Loading Scene Files 115