Preparation 2 Chapter

4 Connect the tuner power cord to the DC OUT connector of the camcorder, and the audio output cable to the AUDIO IN CH-1 or CH-2 connector.

5 Set the switches as below.

•Set the AUDIO IN input selection switch to MIC for the channel to which the audio out cable is connected.

•Set the AUDIO IN (CH-1/CH-2) switch for the channel to which the audio output cable is connected to REAR.

Connecting line input audio equipment

1 Connect an audio mixer or other external audio system component to the AUDIO IN CH-1/CH-2 connector as shown below.

AUDIO IN (CH-1/CH-2) switches:

Set to REAR.

AUDIO IN

FRONT

WRR

REAR

Connecting the Remote Control Unit (DSR-450WS/450WSP only)

Connecting the RM-B150/B750 Remote Control Unit enables remote control of the principal camera and VTR functions.

Connecting the remote control unit to the REMOTE connector (8-pin) automatically puts the camcorder into remote control mode. If you disconnect the remote control unit, the remote control mode is cancelled.

RM-B150/B750

Remote connector

AUDIO IN CH-1/CH-2 connectors

AUDIO IN input selection switch: Set to LINE.

+48V ON

LINE MIC

To audio mixer, etc.

Remote control cable

Note

Before connecting or disconnecting the camcorder and a remote control unit, turn off the camcorder.

2 Set the AUDIO IN input selection switch to LINE for the channel to which the external audio equipment is connected.

Selection of the recording audio input

Set the AUDIO IN (CH-1/CH-2) switch to REAR for the channel to which the external audio equipment is connected.

If you record and adjust both channel 1 and 2, set both AUDIO IN (CH-1/CH-2) switches to REAR.

Camcorder switch functions when the remote control unit is connected

The following switches on the camcorder do not function.

•GAIN switch

•OUTPUT/DCC switch

•WHITE BAL switch

•AUTO W/B BAL switch

•SHUTTER switch

•REC button (the VTR button on the lens and the ASSIGN switch to which the REC SWITCH function is assigned) when the RM REC START item is set to RM on the FUNCTION 3 page of the MAINTENANCE menu.

For details of the function of the REC button, see “Function of the REC button when the remote control unit is connected” on page 39.

Paint adjustment when the remote control unit is connected

The settings of the paint adjustment that were in effect the last time the remote control unit was used are recalled.

38 Connecting the Remote Control Unit (DSR-450WS/450WSP only)