Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below. Be sure to connect the power cord last.
CD/DVD Player
to VIDEO OUTPUT 1 or 2
1Audio/video cord (supplied)
l: Signal flow
3 Power source
to AUDIO OUTPUT L/R 1 or 2
TV
to video input
to audio input
2 Power source
To change the aspect ratio for the connected TV
Depending on the disc and the TV type (standard 4:3 screen TV or wide screen TV), the image may not fit the TV screen.
If this happens, change the aspect ratio (page 90).
When connecting to a TV that accepts progressive (480p) format signal
You need to use the COMPONENT VIDEO OUTPUT jacks to view progressive signals. Hook up your TV using pattern C on page 21, and then run Quick Setup on page 29.
zHint
When connecting to a monaural TV, use a stereo- mono conversion cord (not supplied). Connect the VIDEO OUTPUT jack on the player to the TV’s video input jack, and connect the AUDIO OUTPUT L/R 1/2 jacks to the TV’s audio input jack.
18