◆DOWNMIX (DVD only)
Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “Displaying the audio information of the disc” (page 71). This function affects the output of the following jacks:
–AUDIO OUTPUT L/R 1/2 jacks
–DIGITAL OUTPUT (COAXIAL or OPTICAL) jack when “DOLBY DIGITAL” is set to
DOLBY Select this when the player is
SUR- connected to an audio
ROUND component that conforms to Dolby Surround (Pro Logic).
NORMAL Select this when the player is connected to an audio component that does not conform to Dolby Surround (Pro Logic).
◆DIGITAL OUT
Selects if audio signals are output via the DIGITAL OUTPUT (COAXIAL or OPTICAL) jack.
ON Normally select this position. When you select “ON,” see “Setting the digital output signal” for further settings.
OFF The influence of the digital circuit upon the analog circuit is minimal.
Setting the digital output signal
Switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) or MD deck with a digital input jack.
For connection details, see page 24.
Select “DOLBY DIGITAL” and “DTS” after setting “DIGITAL OUT” to “ON.”
| AUDIO SETUP |
| |
|
| AUDIO ATT: | OFF |
|
| AUDIO DRC: | STANDARD |
|
| DOWNMIX: | DOLBY SURROUND |
|
| DIGITAL OUT: | ON |
|
| DOLBY DIGITAL: | |
|
| DTS: | OFF |
|
|
|
|
|
|
|
|
If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or damaging the speakers.
◆DOLBY DIGITAL (DVD
Selects the type of Dolby Digital signal.
DOLBY Select this when the player is
DIGITAL connected to an audio component with a
94