Labeling a disc or folder using a keyboard
To label the disc or folder, you can use an IBM compatible PC keyboard of the USA model* (not supplied) on the “DISC MEMO INPUT” or “FOLDER NAME INPUT” display.
* Power consumption must be 120mA or less.
Notes
•If the cursor keys do not work correctly and you cannot complete the task using the keyboard, disconnect the keyboard. Then, reconnect it to the player and try again.
•If the keyboard is not the USA model, the characters may be input differently from those on the keys. The USA keyboard layout is shown below.
~ ! @ # $ % ^ & |
| ( | ) | - + |
| ||||
1 2 3 4 5 6 7 8 9 0 - = |
| ||||||||
Q W E R T Y U I O P { | } | ||||||||
|
|
|
|
|
|
|
| [ | ] |
Caps Lock A | S D | F | G | H | J | K | L |
| Enter |
|
|
|
|
|
|
|
|
| |
Z | X | C | V | B N | M | < | > | ? | Shift |
Shift |
|
|
|
|
|
|
|
| |
Ctrl | Alt |
|
|
|
|
|
| Alt | Ctrl |
KEYBOARD jack
1 Connect a keyboard to the KEYBOARD jack on the front panel when the player is in standby mode.
2
3 Perform Steps 1 and 2 of “Labeling a disc or folder” (page 58).
4
5 Press ENTER on the keyboard to store the Disc Memo or folder name.
The Disc Memo or folder name is stored.
To turn off the Disc Explorer
Press ORETURN.
Selecting a genre
You can assign a genre to your disc.
1 Select the disc on the Disc Explorer (Steps 1 and 2 of “Searching for a disc on the Disc Explorer” (page 54) ).
2 After sliding the TV/DISC EXPLORER/ DVD switch to DISC EXPLORER, press EDIT.
The selected disc’s text only is highlighted and EDIT appears at the bottom right corner.
60