The DISC CHANGE indicator lights up.
The front cover opens.
The player turns on.

Playing Discs

Inserting Discs

You can insert up to 300 discs into the disc slots in this player, not counting the EASY PLAY slot.

Front cover

.–/>+ dial

1 Press [/1.

2 Press OPEN/CLOSE.

3 Press DISC CHANGE.

4 Turn the .–/>+ dial until you find the disc slot where you want to insert a disc, while checking the disc slot number indicated on the front panel display or by the slot.

Disc slot number

Disc slot

at the loading position

5 Insert a disc.

Gently place the disc all the way into the slot and do not release the disc until it is completely seated. Make sure you have

inserted the disc into each slot at a right angle to the rotary table. If the disc is not put in straight, it may damage the player or the disc.

With the playback side facing left

6 Repeat Steps 4 and 5 to insert more discs.

7 Press OPEN/CLOSE.

The front cover closes. The rotary table turns and the disc slot at the loading position is set to the playing position.

zHints

•In Step 4, you can select a disc slot number by skipping 10 slots. After sliding the TV/DISC EXPLORER/DVD switch to DISC EXPLORER or DVD, press DISC SKIP +/– on the remote. 10 disc slots each before or after from the current disc slot number will be skipped.

•If you use a Sony 8 cm CD adaptor (not supplied), you can play 8cm (3-inch) CDs with the EASY PLAY slot (page 19).

Notes

•Do not turn the turntable by hand.

•Do not reach inside of the turntable compartment. Always follow the correct steps for inserting and removing discs.

•When transporting the player, remove all discs from the player. Failure to remove the discs may cause damage to the player.

•When closing the front cover, be careful not to let anything get caught between the door and the player.

32