Searching for a disc on the Disc Explorer

.–/>+ dial

Number buttons

1 Press FOLDER repeatedly to select the folder with the disc you want to play.

With each press, the folder indication in the Disc Explorer display changes as follows:

ALL t DVD t CD t A t B t C t D

2 Select the disc by one of the following operations.

•press X/x

•after sliding the TV/DISC EXPLORER/DVD switch to DISC EXPLORER or DVD, press the number buttons and ENTER

•after sliding the TV/DISC EXPLORER/DVD switch to DISC EXPLORER or DVD, press DISC SKIP +/–

•press DISC CHANGE on the player to turn the indicator on, followed by turning the .–/>+ dial on the player and then pressing it.

3 Press ENTER.

The Disc Explorer disappears and playback starts.

To turn off the Disc Explorer

Press ORETURN.

zHint

When you select the disc with the number buttons in Step 2, you can use it to jump through the Disc Explorer display.

For example, you can press number button 6 and then press ENTER to view the Disc Explorer for disc slot numbers 6 to 10, then press 11 and ENTER to view the Disc Explorer for the next five disc slots (number 11 to 15).

.

Notes

•If you press the FOLDER button during playback, the playback stops and the Disc Explorer appears. In this case, the Resume Play is not available.

•If you have inserted a disc whose disc information has not been loaded yet, you cannot select and play the disc on the Disc Explorer. The player skips the disc whose information differs from the loaded disc information, and plays the next loaded disc.

•If you load or try to play an empty slot, it appears as a blank in the Disc Explorer. You cannot select this.

•Even if the disc has a jacket picture recorded on it, the jacket picture may not appear on the Disc Explorer.

54