Sony DVP-NC615 Quick Overview, Unpacking, Inserting Batteries into Remote, Sensor on the player

Simple Start Guide

Quick Overview

A quick overview presented in this guide will give you enough information to start using the player for your enjoyment. To use the surround sound features of this player, refer to “Hookups” on page 18.

Notes

•You cannot connect this player to a TV that does not have a video input jack.

•Be sure to disconnect the power of each component before connecting.

Step 1: Unpacking

Check that you have the following items:

•Audio/video cord (pinplug ⋅ 3 y pinplug ⋅ 3) (1)

•Remote commander (remote) (1)

•Size AA (R6) batteries (2)

•A plug adapter is included with some models.

Step 2: Inserting

Batteries into the

Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment.

When using the remote, point it at the remote

sensor on the player.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.

•If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Simple Start Guide

15