Sony DVP-NC615 operating instructions TV Hookups, When connecting to a monaural TV

Step 3: TV Hookups

Connect the supplied audio/video cord and the power cord in the order (1~3) shown below. Be sure to connect the power cord last.

CD/DVD Player

	LINE OUT	3 Power source
to LINE OUT	to LINE OUT	TV
L/R (AUDIO)	(VIDEO)
	to video input

1 Audio/video
cord (supplied)	to audio input

2 Power source

l: Signal flow

Depending on the TV type, the image of some discs may not fit your TV screen.

If you want to change the aspect ratio, please refer to page 63.

When connecting to a monaural TV

Use a stereo-mono conversion cord (not supplied). Connect the LINE OUT (VIDEO) jack on the player to the TV’s video input jack, and connect the LINE OUT L/R (AUDIO) jacks to the TV’s audio input jack.

For Asian/Oceanian models only To change the color system

The color system of the player is set to NTSC or PAL. If the on-screen menu of the player does not appear on the TV, change the color system of the player to the same color system (PAL or NTSC) of your TV. To change the color system, hold ?/1 down for a few seconds while pressing X on the player.

zHint

To check the current setting of the player’s color system, press ?/1. The ?/1 indicator lights up in green. When “NTSC” appears on the front panel display, the color system of the player is set to NTSC. When “NTSC” does not appear, the color system is set to PAL.

16