Sony DVP-NC615 operating instructions Connecting the Audio Cords, Select a connection

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,	A through	D .
Components to be connected	Connection		Your setup
TV	A	(page 21)	Example

• Surround effects: TVS DYNAMIC (page 48), TVS WIDE (page 48)

Stereo amplifier (receiver) and two speakers B (page 22) Example

• Surround effects: TVS STANDARD (page 48) or

MD deck/DAT deck

• Surround effects: none

AV amplifier (receiver) having a Dolby*	C (page 23) Example
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 66)

AV amplifier (receiver) with a digital input jack	D (page 24) Example
having a Dolby Digital, MPEG audio or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 66),
DTS (5.1ch) (page 67), MPEG audio (5.1ch)
(page 67)

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

**“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

20