Sony DVP-NC615 operating instructions Mpeg DVD only For Asian/Oceanian models only, DTS DVD only

◆MPEG (DVD only; For Asian/Oceanian models only)

Selects the type of MPEG audio signal.

PCM	Select this when the player is
	connected to an audio
	component lacking a built-in
	MPEG decoder. If you play
	MPEG audio sound tracks, the
	player outputs stereo signals
	via the DIGITAL OUT
	(COAXIAL) jack.
MPEG	Select this when the player is
	connected to an audio
	component with a built-in
	MPEG decoder.

◆DTS (DVD only)

Selects whether or not to output DTS signal.

OFF	Select this when the player is
	connected to an audio
	component lacking a built-in
	DTS decoder.
ON	Select this when the player is
	connected to an audio
	component with a built-in DTS
	decoder.

Note

If you select one of the TVS settings while playing a DVD, the player does not output the following signals from the DIGITAL OUT (COAXIAL) jack.

–Dolby Digital signals (when you set “DOLBY DIGITAL” in “AUDIO SETUP” to “D-PCM”) (page 66)

–MPEG audio signals

Settings and Adjustments

67