Sony DVP-NC615 Playing Discs, Turn on your TV Press /1, When using an amplifier receiver

Playing Discs

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

Power
indicator	H A

DISC SKIP

1 Turn on your TV.

2 Press [/1.

The player turns on and the power indicator lights up in green.

3 Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

◆When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.

4 Press A on the player, and place a disc on the disc tray.

To place other discs on the tray, press DISC SKIP and place the discs in the order you want to play them.

Each time you press DISC SKIP, the disc tray turns so you can place the discs on the empty compartments. The player plays from the last disc placed on the tray.

	Disc
With the playback	compartment
	number
side facing down

5 Press H.

The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).

Depending on the disc, a menu may appear on the TV screen. For DVDs, see page 33. For VIDEO CDs, see page 33.

To turn off the player

Press [/1. The player enters standby mode.

zHint

The player will turn off automatically whenever you leave it in stop mode for more than 30 minutes (Auto Power Off function).

For U.S./Canadian models only:

The Auto Power Off function is set to off when you purchase the player. You can turn the function on or off by setting “AUTO POWER OFF” in “CUSTOM SETUP” (page 64).

Notes on playing DTS sound tracks on a CD

•When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must

28