4-25
ROUTING SWITCHER SYSTEM (E)
4-6. Setting Up BKPF-300/301/350/351
4-6. Setting Up BKPF-300/301/350/351
1. Set the switch S1-3 on BKPF-300/301/350/351 to “OFF (TERMINAL)” position.
2. Select the menu item [R: CALL SECONDARY STATION] from the menu screen of primary station,
and call BKPF-300/301/350/351.
The following screen appears.
(Example of BKPF-300)
1SOURCE LOCATION of equipment. Input range is set here.
2DESTINATION LOCATION of equipment. Output range is set here.
3LEVEL of equipment is set here.
4The MATRIX switching timing is set here. (Select either ASYNC or FIELD.)
5The SDI format is set here. (Available in BKPF-300 only.)
(Select a type from three formats of 4: 2: 2, 4fsc NTSC or 4fsc PAL.)
3. Set the above described items from 1 to 5.
(1) Set the items from 1 to 3 as follows. Select an area to modify using the cursor key. Enter any
desired value using the numeric keys on the control terminal.
(2) Set the items 4 and 5 as follows. Select an area to modify using the cursor key, and press
[Enter].
Every pressing of [Enter] increments the preset values in order.
4. Press [Ctrl] _ [D] to return to the menu screen of primary station from the setting screen.
SONY ROUTING SYSTEM SETUP MENU BKPF-300 VX.XX STATION NUMBER XXX
SOURCE No: 0001 - 0008 DESTINASTION No: 0001 LEVEL No: 1
SWITCHING FIELD: ASYNC SDI FORMAT: 4:2:2
Ctrl-D : RETURN Ctrl-E : RETURN TO MENU
1
4
32
5
Model name Software version indication
Station address value