5-22 ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
V: SELECT WARNING DISPLAY
Purpose
This menu is used to set the warning message displayed on
the system status screen.
Setting Procedure
1. Select menu item [V].
2. Press [V], [Enter], and the setting conditions dis-
played will be switched.(“ON” “OFF”).
“OFF” : Displays important messages only
<Reference>
“X-POINT ERROR IN STATION * *
“X-POINT RECOVERED IN STATION * *
“TEMPERATURE RISE IN STATION * *
“TEMPERATURE RECOVERED IN STATION * *
“FAN STOP IN STATION * *
“FAN RECOVERED IN STATION * *
“S-BUS LINK DISCONNECTED TO CHANNEL”
“S-BUS LINK CONNECTED TO CHANNEL”
“ON” : Displays all messages
Displays the following in addition to the above
<Reference>
“BACKUP POWER SUPPLY DOWN IN STATION
* *
“BACKUP POWER SUPPLY RECOVERED IN
STATION * *
“MISSING REFERENCE SIGNAL IN STATION * *
“REFERENCE SIGNAL CORRECTLY FED TO
STATION * *
“VALID INPUT OR OUTPUT BOARD IN STA-
TION * *
“INVALID INPUT OR OUTPUT BOARD IN STA-
TION * *
“BACKUP CPU DOWN IN STATION * *
“BACKUP CPU RECOVERED IN STATION * *
“STATION * * FAILURE (DISCONNECTED OR
POWER DOWN)”
“STARTED BY DVS-V6464B Ver1.00 IN STATION
* *
“DIFFERENT CHECK SUM=35DB IN STATION * *
n
Some messages will not be displayed, depending on the
models.