1-5
DXC-190
FG
14
25
3
1234
56
HI
1
2
3
4
8
7
9
56
12
4
98
5
7
3
6
qa
0
qa
qs
08
7
Phase Adjustment
When using more than one camera, adjust the phase according to the
following procedure.
Horizontal phase (VS/VBS lock mode)
The picture may shift horizontally when using an extended cable. Use the
PHASE volume to adjust the horizontal phase.
CCD Characteristics
The following conditions may be observed when using a CCD camera. They
are not due to any fault within the camera.
Vertical smear
This phenomenon occurs when viewing a very bright object.
Patterned noise
This is a fixed pattern that may appear over the entire monitor screen when
the camera is operated at high temperatures.
Jagged picture
When viewing stripes, straight lines, or similar patterns, the image on the
screen may appear jagged.
Specifications
Image device 1/2type interline transfer CCD
Effective picture elements
768 (horizontal) × 494 (vertical)
Lens mount C-mount/CS-mount adjustable
Signal system NTSC color system
Synchronization system internal/external (switched automatically)
External synchronization signal VBS/VS (sync level: 0.3–5.0 Vp-p, 75 ohm)
Horizontal resolution 470 TV lines
Minimum illumination 0.8 lux, F 1.2
(
with AGC set to ON in TURBO
mode)
Video output 1 Vp-p, 75 ohm, negative sync
Video S/N
50 dB or more (with AGC set to OFF, Weight ON)
Electronic shutter 8 levels
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
White balance AWB/5600K/ATW/ATWpro (switchable)
Automatic gain control (AGC) ON/OFF switchable
Power requirements
DC 12 V ±10%
(DC 12 V for power source)
DC 24 V ±5 V (when YS- W170/W270 is in use)
Power consumption 4.5 W (DC 12 V for power source)
5.5 W (when YS-W170/W270 is in use)
Operating temperature –10 °C to +50 °C (14 °F to 122 °F)
Operating humidity 20 to 80%
Storage temperature –40 °C to +60 °C (–40 °F to 140 °F)
Storage humidity 20 to 95%
Shock resistance 70 G
Mass 600 g (1 lb 5 oz)
Dimensions 64 × 57 × 137 (w/h/d) mm
(2
5
/
8
× 2
1
/
4
× 5
1
/
2
inches)
Supplied accessories 4-pin plug for auto-iris lens (1)
Lens mount cap (1)
Operating Instructions (1)
Design and specifications are subject to change without notice.