Basic System Connection

To supply power to the unit, use the CMA-D2CE/D2MDCE camera adaptor (not supplied).

There are two connections methods as follows.

•Using a CCDC cable which only supplies power to the unit.

•Using a CCMC cable which supplies power to the camera and transmits video signals to the camera adaptor.

Note on use of camera adaptors

Be sure to use one camera adaptor for each DXC-9100P unit.

Although the CMA-D2CE/D2MDCE camera adaptor has two CAMERA connectors (4-pin and 12-pin), the power consumption of the DXC-9100P is such that two camera units cannot be connected at the same time.

Note on connections

Be sure to turn off power supply for all equipment before making any connections.

Note when outputting the WEN signal to peripheral equipment from the camera

Before attempting to connect the RGB/SYNC connector from which the WEN signal is output to peripheral equipment, make sure to complete all of menu settings including the D-SUB Sync setting on PAGE 3 menu.

For details of menu settings, see “Adjustment and Setting with Menus” on page 11.

41