Adjusting and Setting with Menus
Selection Function
ATW Activates
When WHIT.BAL is set to AWB or ATW, the “R Paint” and “B Paint” values are displayed on the menu. Use these for fine adjustment. Adjust these while looking at the screen.
R Paint: Adjusts the red paint
B Paint: Adjusts the blue paint
M.PEDESTAL
Normally set to ±00.
Adjusts the darkness level of the black part of the image. Use this function to bring out details in heavily shaded areas. Use of a waveform monitor will make the adjustment easier.
The pedestal levels of the R, G, B output signals can be adjusted simultaneously within the range from
Adjusting direction | Outline of the image |
|
|
+ | Lighter |
|
|
− | Darker |
|
|
Press the DATA UP and DATA DOWN buttons together to reset the values to ±00.
GAMMA
Gamma compensation.
Selection | Function |
|
|
ON | Compensates the reproduction characteristics of the |
| screen to produce |
| setting for normal camera use. |
|
|
OFF | Outputs the video signal linearly from the CCD without |
| gamma compensation. Use this setting when you |
| want to produce images for image processing or |
| image analysis. |
|
|
DETAIL
Enables and disabales adjustment of the sharpness of the object outlines.
Selection | Function |
|
|
ON | Adjustment of the sharpness of the object outlines |
| disabled. |
|
|
OFF | Does not enable the adjustment of the sharpness of |
| the object outlines. |
|
|
20